160160旋转180度显示参考例程

杭州清达光电技术有限公司

杭州佳显科技有限公司

160160旋转180度显示

下面只是初始化部分的代码，需要详细的测试代码请来电或QQ微信在线咨询。

/******** 初始化程序 ********/
void set()
{ 
  delay(15);
  rest=0;
  delay(1);
  rest=1;
  delay(150);
  write_com(0xac); //关显示
  
  write_com(0xe2);  //System Rest
  delay(2);
 
  write_com(0x25);  //TC[1:0]:Temperature Compensation:-0.05%
  write_com(0x2b);  //PCI[1:0]:Power Control:Interal V,
  write_com(0x40);  //LSB[3:0]:Set Scroll Line:
  write_com(0x50); //MSB[3:0]:Set Scroll Line:


  write_comcom(0x81,0xb0);  //PM[7.0]:Potentiometer


  write_com(0x84);  //LC[8]:Parteal Display Control:disable
 
  /* 正向使用AC[2]=0,指令设置为0x89*/
  /* 旋转180度使用AC[2]=1,指令设置为0x8D */
  write_com(0x8D);  //AC[2:0]:RAM Address Control:CA+1,RA+1/-1


  write_comcom(0x90,0x00);  //FLT,FLB:Fixed Lines
  write_com(0xa3);  //LC[4:3]:Line Rate:15.2k/ps
  write_com(0xa4);  //DC[1]:ALL Pixel OFF
  write_com(0xa6);  //DC[0]:Inverse Display OFF
  write_com(0xa9);  //DC[4:2]:Display Enable:sleep ON（显示关）,an ON/OFF mode,Green Enhance OFF
  
  write_comcom(0xb8,0x00);  //MTP Operation Control:MTPC disnable
  
  /* 正向使用LC[1]=0,指令设置为0xC4*/
  /* 旋转180度使用LC[1]=1,指令设置为0xC6 */
  write_com(0xc6); //LC[2:0]:LCD Mapping Control:Mirror OFF


  write_comcom(0xc8,0x10);  //NIV[3:0]:N-Line Inversion:NIV enable,non-XOR,11Lines
  
  /* 正向使用LC[5]=1,选择RGBRGB格式，指令设置为0xd1*/
  /* 旋转180度使用LC[5]=0,选择BGRBGR格式，指令设置为0xd0  */
  write_com(0xd0);  //LC[5]:Color Pattern:BGR-BGR


  write_com(0xd5);  //LC[7:6]:Color Mode:RRRR-GGGG-BBBB(4K color)


  write_com(0xda);  //CSF[2:0]:COM Scan Function:ABCDE-ABCDE,FRC enable
 
  write_com(0xe9);  //BR[1:0]:LCD Bias Ratio:10
  
  write_comcom(0xf1,0x9f);  //CEN:COM END:159
  write_comcom(0xf2,0x00);  //DST:Partial Display Start:0
  write_comcom(0xf3,0x9f);  //DEN:Partial Display End:159
  write_comcom(0xf4,0x25); //WPC0:Window Rrogram Starting Column Address:SEG112  
  write_comcom(0xf5,0x00); //WPP0:Window Rrogram Starting Row Address:COM0
  write_comcom(0xf6,0x5a); //WPC1:Window Rrogram End Column Address:SEG271
  write_comcom(0xf7,0x9f); //WPP1:Window Rrogram End Row Address:COM159
  write_com(0xf8);  //AC[3]:Window Program Mode:Inside Mode


  write_com(0xad);  //DC[4:2]:Display Enable:sleep OFF（显示开）,an ON/OFF mode,Green Enhance OFF
  
  fill_4k(clear);  //清屏 
}    //*/


void external_int()interrupt 0 //using 1
{
  do{x=1;delay(10);}
  while(x==1);
  delay(10);
}  
 
/********* 主函数 *********/
/********* 12MHz *********/
void main()
{ 
   EA=1; //中断总允许
   IT0=0; //设置外部中断INT0为电平触发方式，低电平有效
   EX0=1;//外部中断INT0允许（INT0使能）
   set();//初始化   
   /******** RRRR-GGGG-BBBB,4K color ********/
   write_com(0xd5);  //LC[7:6]:Color Mode:RRRR-GGGG-BBBB(4K color)
  
dis_1616s(16,8,0,4,TAB1616); //清达光电
dis_1616s(10,30,4,6,TAB1616); //技术有限公司
dis_1616s(16,58,0,4,TAB1616);//清达光电
dis_1616s(10,80,4,6,TAB1616); //技术有限公司
dis_1616s(16,110,0,4,TAB1616);//清达光电
dis_1616s(10,132,4,6,TAB1616);//技术有限公司
while(1);
  }